Item ID: 112686187702
Seller ID: mikhrabi
Listing Type: Fixed Price Item
List Date: 12-12-2017
End Date: 05-12-2020
Category: Miners
Location: Miami, Florida
  1. Home
  2. »
  3. Coins & Paper Money
  4. »
  5. Virtual Currency

Original antminer apw3++ psu 1600w power supply for bitmain d3 s9 s7 l3 b3 x3 t9


$59.00
Sold Want to Buy This?

Description:*The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.* This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.Specifications:Weight:Gross Weight: 2.1kgPackage size:32.7*16.8*12.6cmOutput*DC Voltage:12.15V*Rated Current(220V input): 133A*Rated Current(110V input): 100A*Rated Power(220V input): 1600W*Rated Power(110V input): 1200W*Ripple & Noise: <1%*Voltage Regulation: <2%*Source Regulation: <1%*Load Regulation: <1%*Setup, Rise Time: <2s*Power off Protection Trip Time: >9mS*Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)*Noise Level: <43dbInput:*Voltage Range: 100-240V AC*Starting Voltage: 95-105V AC*Frequency Range: 47-63Hz*Power Factor: >0.95 (full load)*Leakage Current: <1.5mA (220v 50Hz)Protection1.Low-voltage Input:80-89V AC2.Output Short Circuit:Yes3.Output Overcurrent:134-185A max.4.Overheat Protection:YesEnvironment Conditions1.Operating Temperature: -20°C - 50°C2.Operating Humidity: 20% - 90% relative humidity (non-condensing)StructureDimensions: 220mm*108mm*62mmCoolingFan:Forced-air coolingPackage includes:1 x APW3 power supply for Antminer D3 S9 S7 L3 X3 B3 Z9 T9 V9Note:*The power cord is not included, please find one with at least 10A from your local market.*This item is not supplied for Antminer G1 R1*The best temperature of this item to work is 15-35 ℃.

Brand: Antminer
Package size: 32.7*16.8*12.6cm
Voltage Range: 100-240V AC